Repairs: 10 Mistakes that Most People Make

How to Maintain Your Own Swimming Pool

It is not really that difficult to keep your swimming pool clean. Pools are different from each other and so are their preservation needs. Frequent, routine care is necessary for a healthy and clean swimming pool. It is important to have a pool maintenance guide if you want to prevent issues before doing anything. Doing regular pool maintenance will free you from anything that will cause annoyance and emergency trips to the store for supplies. Even if you hire professional pool cleaning services to clean your swimming pool, you still need to do a few things to make sure that your pool remains in good condition for many year.

Check out the guidelines below when you are doing pool maintenance.

During the summer, it is beneficial if you observe your pool chemistry at least twice a week and during the winter at least once a week. There is no need to test the water if you winterize your pool during the winter months. Even in the cold weather, algae and bacteria can still grow. Your pool should be shocked every 6 weeks or so during months.

Once every month, check the water level and adjust as required. It should be at the middle of the skimmer if you are checking the water level. A very high water level will not help the water circulate and move.

Walls and tile should be scrubbed regularly. If you want to eliminate algae, then you need to scrub your walls regularly. You can have money savings if your tiles are always clean. Algae likes to stick to walls and steps. So, keep them clean.

Replace all broken or misplaced drains and suction supplies. This is something you should do if you want a well maintained swimming pool. If there is a suction side leak at the pump, you are sucking air into the system. If you need to gauge this, you should run the equipment and look at the water coming out of your return lines. If you see a lot of bubbles, then this indicates excessive air is getting into the system. Too much air coming into the system will make your pump dry and freeze. You will need to replace this and it can be very expensive.

The pH level should not go above 8.0. To use the maximum potential of the chlorine in the pool you need to always check the pH level of the pool. The effectiveness of the chlorine will be reduced if the pH reaches below 7.2. This means you will be adding more and more chlorine but getting less benefit from it. This is just like throwing away your money.

Case Study: My Experience With Maintenance

Repairs: 10 Mistakes that Most People Make

Leave a Reply

Your email address will not be published. Required fields are marked *